TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 187 of 772
TM 9-2350-260-20-1-2 POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 4 of 9) NOTE It may be necessary to depress three flanges (T) on frame bottom during removal to clear protruding obstacles on the engine. 13. Remove oil cooler support frame (S). 14. Using 9/16 inch socket with 5 inch extension and 9/16 inch wrench, remove self-locking nut (U). Throw nut away. 15. Using 1/2 inch socket with extension, remove nub (V). 16. Move clamp (W) to up position and remove bracket (X) and screw (Y). 17. Remove screw (Y) from bracket (X). 18. Using 1/2 inch socket and 1/2 inch wrench, remove screw and nut (Z). 19. Remove clamp (AA) from bracket (AB) and fuel line. 20. Using 1/2 inch socket with extension, remove self- locking nuts (AC). Throw nuts away. 21. Remove bracket (AB). 22. Using 1/2 inch socket with extension, remove four brackets (AD). Go on to Sheet 5 TA147562 6-110