TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 184 of 772
TM 9-2350-260-20-1-2 POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 1 of 9) PROCEDURE INDEX PROCEDURE PAGE Removal 6-108 Installation 6-112 TOOLS: Ratchet with 1/2 in. drive Alining punch 5 in. extension with 1/2 in. drive 1/2 in. combination box and 1/2 in. socket with 1/2 in. drive open end wrench 5/8 in. socket with 1/2 in. drive 3/8 in. combination box and 9/16 in. socket with 1/2 in. drive open end wrench 11/16 in. socket with 1/2 in. drive 9/16 in. combination box and 4 in. flat-tip screwdriver open end wrench SUPPLIES: Lockwasher (7410218) (4 required) Self-locking nut (MS21045-6) (2 required) Self-locking nut (MS21044N5) (8 required) Self-locking nut (MS21045-7) (6 required) Self-locking nut (8764639) Self-locking nut (MS21045-5) PERSONNEL: Two PRELIMINARY PROCEDURES: Remove powerplant (page 5-1) Remove engine shroud (page 9-2) Remove centrifugal fan housing (page 9-59) Remove engine cooling fans (page 9-48) Remove engine cooling fan shroud (page 9-52) Remove powerplant access (left bank) covers (page 6-88) Remove engine left oil cooler (page 6-93) Remove transmission left oil cooler (page 6-145) Go on to Sheet 2 TA147559 6-107