TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 180 of 772
TM 9-2350-260-20-1-2 POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 6 of 9) NOTE Five of the six cooler frame upper brackets are identical and are mounted the same way. The sixth bracket (C) is located closest to the engine flywheel end and requires shims and an additional screw and self-locking nut for proper installation. 3. Using 9/16 inch socket with extension, install shims (C). Hold screw head below shims with 9/16 inch wrench to keep screw from tuning. 4. Using 1/2 inch socket with extension, install six brackets (D). NOTE It may be necessary to depress three flanges (E) on frame bottom during installation to clear protruding obstacles on the engine. 5. Install oil cooler support frame. Go on to Sheet 7 TA147555 6-103