TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 179 of 772
TM 9-2350-280-20-1-2 POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 5 of 9) 13. Using 9/16 inch socket with extension, or 1/2 inch wrench, remove six brackets (N). 14. Using 11/16 inch socket, remove two self-locking nuts, washers, and spacer s from three frame support brackets (P). Remove frame support brackets (P). Throw self-locking nut away. 15. Check oil cooler support frame (Q) for dents and breaks. Repair if possible, or replace if necessary. 16. Check timing access cover (R) for breaks. Replace if necessary. 17. Check rubber strips (S) for tears and breaks. Replace if necessary. 18. Check brackets (P) and (N) for cracks and breaks. Replace if necessary. INSTALLATION: 1. Position each frame support bracket (A) for mounting. 2. Using 11/16 inch socket, install two washers, spacers, and n self-locking nuts (B) to secure each bracket. Go on to Sheet 6 TA147554 6-102