Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 176 of 772

TM 9-2350-260-20-1-2 POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (20 ENGINE) (Sheet 2 of 9) NOTE Because of space limitations, it may be necessary to interchange like-size sockets and wrenches to get at a particular screw. REMOVAL: 1. Using 1/2 inch socket and extension, remove two assembled washer bolts and cushioned clamps (A). 2. Using 1/2 inch socket and extension, remove washer bolt (B). 3. While supporting ignition unit (C), and using 1/2 inch wrench, remove two capscrews (D). 4. Remove ignition unit (C) with clamps and leads from frame. 5. Using 1/2 inch socket, remove two capscrews (E) and self-locking nuts from bracket. Use 1/2 inch wrench to keep nuts from turning. Throw self- locking nut away. 6. Using 9/16 inch socket, remove screw with cushioned clamp (F) holding cable assembly. Use 9/16 inch wrench to keep nut from turning. Go on to Sheet 3 TA147551 6-99