TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 175 of 772
TM 9-2350-260-20-1-2 POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 1 of 9) PROCEDURE INDEX PROCEDURE PAGE Removal 6-99 Installation 6-102 TOOLS: Ratchet with 1/2 in. drive 1/2 in. combination box and Hinged handle with 1/2 in. drive open end wrench 6 in. extension with 1/2 in. drive 7/16 in. combination box and 1/2 in. socket with 1/2 in. drive open end wrench 9/16 in. socket with 1/2 in. drive 9/16 in. combination box and Alining punch open end wrench 3/4 in. combination box and 11/16 in. socket with 1/2 in. drive open end wrench SUPPLIES: Self-locking nut (MS21044N5) (2 required) Self-locking nuts (MS21045-6) (6 required) Self-locking nut (MS210450) (6 required) PERSONNEL: Two PRELIMINARY PROCEDURES: Remove powerplant (page 5-25) Remove engine shroud (page 9-2) Remove engine right oil cooler (page 6-128) Remove transmission right oil cooler (page 6-145) Remove engine cooling fan shroud (page 942) Remove engine cooling fans (page 9-48) Remove centrifugal fan housings (page 99) Remove engine access covers (right bank) (page 6-79) Go on to Sheet 2 TA147550 6-98