TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 149 of 772
TM 9-2350-260-20-1-2 CRANKCASE BREATHER TEE AND REAR TUBE REPLACEMENT (Sheet 3 of 4) 7. Using screwdriver, remove four clamps (A) and two hoses (H) from breather tube (B). Throw hoses (H) away. INSTALLATION: 1. Install new hose (A) on breather tube (B). Place two clamps (C) on hose (A). 2. Connect breather tee (D) to hose (A). 3. Install breather tee (D) with two new gaskets (E) and spacer (F) to engine, using two screws (G) and new lockwashers (H). 4. Using screwdriver, tighten two clamps (C). 5. Using open end wrench, tighten two screws (G). Go on to Sheet 4 TA147525 6-72