TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 148 of 772
TM 9-2350-260-20-1-2 CRANKCASE BREATHER TEE AND REAR TUBE REPLACEMENT (Sheet 2 of 4) REMOVAL: 1. Using screwdriver, loosen two damps (A) holding breather tube () to exhaust tube (C) and breather tee (D). 2. Remove breather tube (B) from tank. 3. Using screwdriver, loosen clamp (E). 4. Using wrench, remove two screws and lockwashers (F) holding breather tee (D) to engine. Throw lockwashers away. 5. Remove breather tee (D), spacer, and two gasket from engine. Throw gaskets away. 6. Using screwdriver, remove two clamps (E) and hose (G) from breather tee (D). Throw hose (G) away. Go on to Sheet 3 TA147524 6-71