TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 144 of 772
TM 9-2350-260-20-1-2 MULTIPLE FLUID PRESSURE LINE CONNECTOR REPLACEMENT (Sheet 4 of 6) 2. Connect hose (D) to connector (A). 3. Using 1 inch wrench, tighten hose connector (D). Make sure connector (A) is installed with hose fittings pointed down. 4. Connect hoses (E) and (F) to connector (A). 5. Using 11/16 inch wrench, tighten connectors (E) and (F). 6. Position hose (F) so that free end passes through right engine shroud. Using fingers and screwdriver, position grommet (G) over hose and into shroud. Go on to Sheet 5 TA147521 6-67