TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 143 of 772
TM 9-2350-260-20-1-2 MULTIPLE FLUID PRESSURE LINE CONNECTOR REPLACEMENT (Sheet 3 of 6) 7. Using 1/2 inch wrench, remove loop clamp (K) that secures left hose (L) to engine shroud. 8. Using 1/2 inch socket, remove loop clamp (K) that secures right hose (M) to engine shroud. 9. Remove hose grommets from left and right side engine shrouds. 10. Remove hoses (M) and (L) to inside. INSPECTION: 1. Check hoses for cracks, holes, and leaks. 2. Check hose connectors for stripped thread and wear. 3. Check loop clamps for serviceability. 4. Replace parts as needed. INSTALLATION: 1. Using 1-1/8 inch socket, secure connector (A) with flat washer and retaining nut (C). Go on to Sheet 4 TA147520 6-66