TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 130 of 772
TM 9-2350-260-20-1-2 CYLINDER HEAD AND OIL PAN DRAIN TUBES (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4) 3. Holding nut with wrench and using screwdriver, disconnect four fuel line clamps (C) from oil drain line. 4. Using screwdriver, loosen 16 clamps (D) on 8 hoses (E) on each end of drain tube assembly. 5. Using pliers, cut lockwire on six capscrews (F). 6. Using 7/8 inch socket, remove 6 capscrews (F) and 12 washers (G). 7. Remove washers (G) and throw away. 8. Remove drain tube assembly (H) from engine. INSPECTION: 1. Inspect capscrews r stripped threads. 2. Inspect hose clamps for general serviceability. 3. Replace defective part as required. Go on to Sheet 3 TA147507 6-53