TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 127 of 772
TM 9-2350-260-20-1-2 DRAIN ENGINE OIL (2D ENGINE) (Sheet 2 of 3) 4. Position container under drain valve opening. 5. Using ratchet and extension, remove oil drain plug (F) from engine oil pan (G). 6. Using 9/16 inch socket with extension, remove vent bolt (H) and sealing washers (J). Throw washers away. 7. Using 3/4 inch socket, loosen oil drain valve (K) six complete turns. 8. Allow engine oil to drain into container. 9. After draining, clean area around drain plug (F) with rags (Item 65, Appendix D) and, using ratchet and extension, install drain plug (F) into engine oil pan (G). Go on to Sheet 3 TA147504 6-50