TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 122 of 772
TM 9-2350-260-20-1-2 OIL FILLER TUBE AND HOSE (LOWER) REPLACEMENT (Sheet 1 of 2) TOOLS: 5/16 in. socket with 1/2 in. drive 5 in. extension with 1/2 in. drive 1/2 in. combination box and open end wrench Putty knife Ratchet with 1/2 in. drive SUPPLIES: Gasket (8682523) Rags (Item 65, Appendix D)- Dry cleaning solvent (Item 54, Appendix D) Lockwasher (7045881) (3 required) PRELIMINARY PROCEDURE: Remove powerplant (page 5-1) REMOVAL: NOTE Using dry cleaning solvent (Item 65, Appendix D) and rags (Item 65, Appendix D), clean all parts and general area prior to removal. 1. Using socket, loosen two clamps (A) from hose (B). 2. Using 1/2 inch wrench, remove three screws (C) and lockwashers (D) from tube assembly (E). Throw lockwashers away. 3. Pull tube assembly (E) and hose (B) loose and slip off two clamps (A). 4. Using putty knife, remove gasket (F) and throw away. Go on to Sheet 2 TA147499 6-45