TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 119 of 772
TM 9-2350-2620-1-2 OIL FILLER TUBE (UPPER) REPLACEMENT (Sheet 2 of 4) 3. Using 1/2 inch socket, remove two screws (D) and lockwashers (E). Throw lockwashers away. 4. Using 5/16 inch socket on nut of clamp (F), loosen clamp. 5. Slip clamp (F) off hose (G). 6. Pull tube assembly (H) loose from hose (G) and remove tube assembly. 7. Using screwdriver, release spring (J) from cap assembly (K). Remove spring. 8. Using screwdriver, remove two screws (L) and remove cap assembly (K). 9. Remove packing (M) from under lip of cap assembly (K). Throw packing away. 10. Using putty knife under plate (N), remove two drive screws (P), flat washers (Q), and plate (N). Go on to Sheet 3 TA147496 6-42