TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 117 of 772
TM 9-2350-280-20-1-2 ENGINE OIL LEVEL GAGE CAP REPLACEMENT (2D ENGINE) (Sheet 3 of 3) INSTALLATION: 1. Place new gasket (A) on cap assembly (B). 2. Place cap assembly (B) in position on engine access plate (C). 3. Using socket, install two screws (D) and new lockwashers (E). 4. Place engine access plate (C) in position on powerplant and push down until seated. 5. Using socket, install eight screws and washers (G). 6. Place plate with electrical connectors (H) in position. 7. Using socket, install four screws and washers (J). 8. Open filler cap (B), insert gage (F), and close filler cap (B). 9. Install engine shroud (page 9-3). 10. Install powerplant page (page 5-40). End of Task TA147494 6-40