TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 103 of 772
TM 9-2350-260-20-1-2 ENGINE OIL FILTER ELEMENT REPLACEMENT (20 ENGINE) (Sheet 2 of 5) REMOVAL: 1. Using socket, remove screw (A) and sealing washer from filter element cover (B). Throw sealing washer away. 2. Using wrench, turn screw (C) to the left six full turns. NOTE Wait about 5 minutes before doing steps 3 thru 7. 3. Using socket, remove 10 self-locking nuts and washers (D). Throw self-locking nuts away. 4. Install two 3/8-24NF by 3 inch screws in threaded holes (E). 5. Using socket, tighten screws in hole (E) and remove filter cover (B). 6. Remove gasket (F) and throw away. Go on to Sheet 3 TA147480 6-26