TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 101 of 772
TM 9-2350-260-20-1-2 AUXILIARY OIL FILTER REPLACEMENT (2A ENGINE) (Sheet 5 of 5) 3. Install new gasket (G) onto eight studs (H) on housing. 4. Install filter assembly (J) into housing. Push filter onto eight studs (H). Make sure slot (K) on top of filter (J) is alined with stop bolt (L) on housing. 5. By hand, install eight new self-locking nuts and washers (M) onto eight studs (H). 6. Using 1/2 inch socket, tighten nuts (M) onto studs (H). 7. Using 1/2 inch wrench on stop bolt (L), tighten stop bolt. 8. Fill engine with oil (Item 43, Appendix D) (LO 9-2350-260-12). 9. Start engine and check for leaks (TM 9-2350-260-10). 10. Stop engine. 11. Install upper access cover onto bulkhead (page 16-44). End of Task TA147478 6-24