TM-9-1240-382-34P M35E1 Periscope Direct and General Maintenance and Parts Manual Download
Page 7 of 77
Recoverability Code Definition Z.....................Nonrepairable item. When unserviceable, condemn and dispose at the level indicated in position 3. 0.....................Reparable item. When uneconomically reparable, condemn and dispose at organizational level. F..................... Reparable item. When uneconomically reparable, condemn and dispose at the direct support level. HE..................Reparable item. When uneconomically reparable, condemn and dispose at the general support level. D .................... Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal not authorized below depot level. L..................... Reparable item. Repair, condemnation, and disposal not authorized below depot/specialized repair activity level. A .................... Item requires special handling or condemnation procedures because of specific reasons (i.e., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specific instructions. c. National Stock Number. Indicates the National stock number assigned to the item and which will be used for requisitioning purposes. d. Part Number. Indicates the primary number used by the manufacturer (individual, company, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items. NOTE When a stock numbered item is requisitioned, the item received may have a different part number than the part being replaced. e. Federal Supply Code for Manufacturer (FSCM). The FSCM is a five-digit numeric code listed in SB 708-42 which is used to identify the manufacturer, distributor, or Government agency, etc. f. Description. Indicates the Federal item name and, if required, a minimum description to identify the item. Items that are included in kits and sets are listed below the name of the kit or set with the quantity of each item in the kit or set indicated in the quantity incorporated in unit column. When the part to be used differs between serial numbers of the same model, the effective serial numbers are shown as the last line of the description. In the special tools list, the initial basis of issue (OI!) appears as the last line in the entry for each special tool, special TMDE, and other special support equipment. When the density of equipments supported exceeds density spread indicated in the basis of issue, the total authorization is increased accordingly. g. Unit of Measure (U/M). Indicates the standard of the basic quantity of the listed item as used in performing the actual maintenance function. This measure is expressed by a two-character alphabetical abbreviation (e.g., ea., in., pr, etc). When the unit of measure differs from the unit of issue, the lowest unit of issue that will satisfy the required units of measure will be requisitioned. h. Quantity Incorporated in Unit. Indicates the quantity of the item used in the breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. A "V" appearing in this column in lieu of a quantity indicates that no specific quantity is applicable (e.g., shims, spacers, etc.). 4. Special Information a. Detailed manufacturing instructions for items source coded to be manufactured or fabricated are found in TM 9- i240-382-3h series. Bulk materials required to manufacture items are listed in the Bulk Material Group of this manual. b. The following publications pertain to Tank Periscope, M35E1 and its components: Publication and Short Title TM 9-2350-253-10, Operator’s Manual: Tank, Combat, Full- Tracked: 105-MrM Gun, M60A3 Turret TM 9-2350-253-20-2, Organizational Maintenance Manual: Tank, Combat, Full-Tracked: 105-NM Gun, M60A3 Turret TM 9-2350-253-20P-2, Organizational Maintenance Repair Parts and Special Tools List for Turret of Tank, Combat, Full-Tracked: 105-MM4 Gun, M60A3 Turret TM 9-1240-382-34, Direct Support and Central Support Maintenance Manual for M35E! Periscope, Tank 3