TB-9-2300-378-14 Technical Bulletin for Air Induction System M48 M60 Download
Page 78 of 296
TB 9-2300-378-14 a. General. The nuts securing the inlet or outlet elbow of the air cleaner may loosen thus allowing dust to be drawn into the engine. Check that the securing nuts are properly tightened according to the following procedures. b. Torquing Procedures. (1) Tools required. (a) 9/16 inch socket, 1/2 inch drive (b) 6 in. socket extension, 1/2 inch drive (c) Torque wrench, 1/2 inch drive, 0-175 ft-lb (2) Whenever the air cleaner is serviced or replaced, check that the elbow securing nuts are properly tightened. NOTE On the M60 series tank, the nuts in positions and 2 of the outlet elbow cannot be tightened if the air cleaner is mounted on the tank. Be sure to tighten all nuts whenever the air cleaner is removed. 4-8. Spring Loaded Air Cleaner Filter Element (Fig. 4-13) Figure 4-13. Spring-loaded air cleaner filter element. An improved spring-loaded filter element is available that has increased dust capacity. This greater dust capacity provides greater mileage between cleanings. It also provides a more positive seal, through the use of spring loaded locking pins, that reduces the possibility of dust ingestion. 4-18