TB-9-2300-378-14 Technical Bulletin for Air Induction System M48 M60 Download
Page 57 of 296
TB 9-2300-378-14 (o) Close top grille doors (TM-10). (3) Outlet Hose (V-Band Clamp) (Fig. 3-13). Figure 3-13. Air outlet (a) (b) (c) (d) (e) (f) (g) hose replacement (V-band clamp). Loosen hose clamps (view A). Remove clamps from hose. Remove hose from elbows. Inspect hose packing. If it is cracked, loose or dry, replace as follows: 1. 2. 3. Remove packing and clean away adhesive. Apply adhesive, MIL-SPEC MMM-A-1617, Type II - NSN 8040-00-152- 0063 (2.5 oz. can) or NSN 8040-00-152-0067 (6 oz. can) - in groove of hose assembly flange. Install new packing - NSN 5330-00-729-5049 (part no. 10870861). Check metal flange ends for bonding to hose. If bonding is loose, replace hose assembly. Check V-band clamps for split bands (view B) bent or stripped T-bolts, and damaged nuts. Replace defective clamp NSN 5340-00-678-6178 (part no. 8711310). Turbocharger end, NSN 4730-01-132-9086, PN 01- 1000 outlet end. Check flat band clamp for proper installation. If not installed properly, loosen and apply a light coat of lubricant (silicone grease MIL-G-46886) to the area of hose where clamp will be installed, install clamp and tighten securely. 3-37