TB-9-2300-378-14 Technical Bulletin for Air Induction System M48 M60 Download
Page 51 of 296
TB 9-2300-378-14 NOTE Inspection of left and right intake hoses is the same. (a) (b) (c) (d) (e) (f) Traverse turret so main gun points over left or right side of tank. Open top grille doors. Check intake hoses for misalinement (view A). A hose that appears too short may be misalined. Aline mis- alined hoses. Check intake hoses for holes or cracks (view B). Re- place defective hoses. Refer to para. 3-6b. Check for loose hose clamps (view C). Make sure hose is properly seated and clamps are positioned correctly. Tighten loose clamps. Check flat band clamp and screw threads on T-bolt (view C). If clamps or threads are damaged or missing, replace clamp. (2) Air Outlet Hoses (Air Cleaner to Turbosupercharger). NOTE If finger band clamps are installed, perform steps (a)1 thru (a)8. V-band clamps are installed, perform steps (b)1 thru (b)7. Inspection of left and right outlet hoses is the same. 3-31