TB-9-2300-378-14 Technical Bulletin for Air Induction System M48 M60 Download
Page 186 of 296
TB 9-2300-378-14 i. Dust Detector Warning Light Box Assembly Replacement (M48A5 AVLB, M60A1 AVLB) (Fig. 6-26). (1) Removal (a) (b) (c) If (d) (e) Disconnect harness connector from dust detector warning light box assembly. Remove two screws, nuts and lockwashers securing bracket and dust detector warning light box assembly to support bracket. Remove dust detector warning light box assembly from support bracket. NOTE support bracket is to be replaced go to step (d). Remove two screws and lockwashers securing support bracket to launcher basket. Remove bracket. (2) Installation If (a) NOTE support bracket was removed go to step (a), if not, go to step Position support bracket on launcher basket and secure using (b). two screws and lockwashers. (b) Position bracket and dust detector warning light box assembly on support bracket and secure using two screws, lockwashers and nuts. CAUTION Do not overtighten harness connector. Damage to connector may result if overtightened. (c) Connect harness connector to dust detector warning light box assembly. 6-64