TB-9-2300-378-14 Technical Bulletin for Air Induction System M48 M60 Download
Page 100 of 296
TB 9-2300-378-14 (q) (r) (s) (t) (u) (v) (w) (x) Install three plates 8705499 and three locknuts MS51988-7 securing front stowage box to outrigger number 2 (view L). Install four flat washers MS27183-17 and locknuts MS51988-7 securing front stowage box to tank. Install three plates 8705499, two new bolts MS35764-1291 and new locknut MS51988-7 securing front stowage box to outrigger number 3 and outer support bracket. Torque the two bolts to 25 lb-ft (34 N·m) lubricated. Position rear fender stowage box between outrigger numbers 4 and 5. Install three plates 8705499, new locknut MS51988-7 and two new bolts MS35764-1291 securing rear stowage box to outrigger number 4 and outer support bracket (view M). Install three flat washers stowage box to tank. Install three flat washers Torque two bolts to 25 1b-ft (34 N·m) lubricated. MS27183-17 and locknuts MS51988-7 securing rear MS27183-17 and locknuts MS51988-17 securing rear stowage box to outrigger number 5. Install 6 screws MS90726-60, 12 flat washers MS27183-14, 6 lockwashers MS35338-46 and 6 nuts MS51967-8 securing rear stowage box to fender reinforcing angle. 4-40