MWO-9-2300-378-34-2 Maintenance Work Order for M60 Smoke Generation Download
Page 39 of 92
MW0 9-2300-378-34-2 Section II. Assembly of Smoke Generator Switch Bracket NOTE These instructions apply for all vehicles. (1) Using two Screws MS35206-245 and lockwashers MS35333-38, attach switch 12270522 and switch guard l1669488 to bracket 12270525 with switch at position at top and guard positioned to shut OFF when closed (figure 26). (2) flat washers (3) screws MS3 Position two (4) (5) (6) (figure 26). (7) Attach cover plate 12250517 to switch bracket with four screws MS35206-245, MS27183-41, lockwashers MS35333-38, and nuts MS35649-282 (figure 26). NOTE o Be sure rubber gasket (which is part of base) is installed inside of indicator light base. o Be sure to install lockwashers MS45904-57 between light base and switch bracket. Attach indicator light base 10933573 to back side of switch bracket with two 5206-245, lockwashers MS45904-57, and lockwashers MS35333-38 ( lockwashers MS45904-57 between light base and switch bracket. Install lamp MS25231-1829 into base (figure 26). Screw indicator light adapter 10924435 into indicator light base (figure Install preformed packing (O-Ring) MS28775-119 and lens 10933574-1 Con nect lead from switch to indicator light (figure 26). figure 26). 26). on adapter Figure 26. Assembly of Smoke Generator Switch Bracket 37