MWO-9-2300-378-34-2 Maintenance Work Order for M60 Smoke Generation Download
Page 20 of 92
MWO 9-2300-378-34-2 (7) At rear of engine, cut safety wire from two transmission Iifting eye bolts. Remove and retain the two bolts (figure 7). NOTE During next step, insure there is adequate clearance between solenoid assembly and crankcase breather tube (figure 7). If solenoid assembly is going to contact breather tube, the breather tube rubber hose may be trimmed and tube pushed back into rubber hose to gain sufficient clearance. The solenoid bracket may also be bent back slightly to gain clearance. (8) Attach solenoid bracket to transmission lifting eye bracket with the two bolts previously removed and torque bolts 50-60 lb-in. (5.6 -6.8 N.m) (figure 7). (9) put safety wire on transmission lifting eye bolts (figure 7). Figure 7. Installation of Solenoid Valve Assembly 18