NOTE Refer to paragraph (15) below for disassembly instructions on the fulcrum lever used on code A, B, C, D, E and F pumps. Refer to paragraph (16) below for instructions on the code G pumps. (15) Refer to figure 3-67. Remove self-locking TM 9-2910-226-34 nut (A) and fuel control rod (B). Remove flat washer (C) and spring (D). Remove hex nut (E), lock washer (F), control rod pin screw (G), smoke limit cam (H) and spacer (K). (Spacer (K) is used only on code A pumps. ) Remove setscrew (J). (Fulcrum lever used in code C and D pumps is not equipped with setscrew (J).) Figure 3-67. Disassembling or assembling fulcrum lever assembly. 3-45