TM 9-2910-226-34 CHAPTER 2 DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE INSTRUCTIONS Section I. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT 2-1. General. Special tools, equipment and main- tenance parts over and above those available to the using organization are supplied to direct support and general support maintenance units for maintaining and repairing the fuel injection pump. 2-2. Repair Parts. Repair parts for the metering and distributing fuel injection pump are listed in ap- pendix B. 2-3. Common Tools and Equipment. Standard and commonly used tools and equipment having general application to this material are authorized by tables of allowances (TA) and table of organization and equipment (TOE). 2-4. Special Tools and Equipment. The special tools illustrated in figure B-10 and listed in table 2-1 are those tools necessary to perform operations described in this manual. 2-5. Improvised Tools. Refer to figure 2-1 which illustrates an improvised tool used for setting the smoke limit cam angle. Tool Dimensions Gap Tool Outer Inner 1 0.030 0.110 2 0.040 0.110 3 0.050 0.110 2-1