TM 9-2910-226-34 g. 1-Year Allowances per 100 Equip- merits/contingency Planning Purposes, Column (8). This column indicates the requirement for con- tingency planning purposes. An asterisk indicates authorization to obtain or use as required. This column is left blank except for the special tools list. h. Depot Maintenance Allowances per 100 Equipment, Column (9). This column indicates authorization for depot use. This column is left blank. i. Illustration, Column (JO). This column is divided as follows: (1) Figure Number, Column (10) (a). Indicates the figure number of the illustration in which the item is shown. (2) Item Number, Column (10) (b). Indicates the callout number used to reference the item in the illustration. B-4. Special Information. a. Identifications of the usable-on codes for the pumps and the engine assemblies they are used on are included at the end of the description column, column (3) of this publication, and are: D A B C E F G Blank LDS-465-2 Engine Assembly LDS-465- 1A Engine Assembly LD-465-1 Engine Assembly LD-465-lC Engine Assembly LDT-465-lC Engine Assembly LDS-465- 1 Engine Assembly LDS-427-2 Engine Assembly Applicable to all pump assemblies b. The basis of issue for authorized special tools, and test and support equipment is the number of end items of equipment supported and the number of maintenance personnel allocated to perform the required maintenance operations (such as, six of each tool for each 100 pumps supported). c. Parts which require manufacture or assembly at a category higher than that authorized for in- stallation will indicate in the source column the higher category. d. Certain parts are supplied in parts kits and gasket sets. When a kit is composed of parts which are normally in more than one group, the kit will be listed in only special purpose kits section. Com- ponents of the kit which are not in that particular group will appear in their normal group listing with an appropriate reference to the kit. Component parts of a kit which have a Federal stock number and are source coded P may be procured as line items. e. The following publications are the up-assembly of Pump, Fuel, Metering and Distributing, Assemblies 2910-1 16-8241, 2910-178-1185, 2910-759- 5410, 2910-908-6320 and 2910-968-6317. TM 9-2815-210-34P Direct support and general support maintenance repair parts and special tools list (including depot main- tenance repair parts and special tools): Engine, diesel (multifuel): turbocharged, fuel injected, water cooled, 4-cylinder assembly (military models LD-465-1, 2815-239-5834, LG-465-lC, 2815-134-4830, LDT- 465-1C, 2815-103-2642, LDS-465-1, 2815-075-0087, LDS-465-1A, 2815- 239-5819, and LDS-465-2, 2815-808- 8011 and clutches). TM 9-2815-204-34P Direct support and general support maintenance repair parts and special tools list (including depot main- tenance repair parts and special tools): Engine, diesel: with container liquid cooled, V-type, six cylinder (2815-022-6732) composed of: engine, diesel: (Detroit Diesel-GMC model 5063-5299, series 6V53) and container (8115-202-8589) engine, diesel: with container (2815-909- 5949) composed of: engine, diesel: (Detroit Diesel-GMC model 5063- 5398 series 6V53T) and container assembly (8115-999-5336). f. Tables B-1 and B-2 are provided as a rapid index to all recoverable, direct exchange items and repair kits and sets contained in this manual. The items in table B- 1 are in FSN sequence and the items in table B-2 are listed in functional group sequence. B-5. How to locate Repair Parts. a. When Federal stock number or reference number is unknown. (1) First. Using the table of contents, deter- mine the appropriate group, subgroup, or assembly group; i.e., fuel supply pump. governor; etc., within which the repair part belongs. This is necessary since illustrations are prepared for groups and subgroups, and listings are divided into the same groups. (2) Second. Find the illustration covering the group, or subgroup, to which the repair part belongs. (3) Third. Identify the repair part on the illustration and note the illustration figure and item number of the repair part. (4) Fourth. Using the repair parts listing, find the group or subgroup, to which the repair part belongs and locate the illustration figure and item number noted on the illustration. b. When Federal stock number or reference number is known: (1) First. Using the index of Federal stock numbers and reference numbers find the pertinent Federal stock number or reference number. This index is in ascending FSN sequence followed by a list of reference numbers in ascending alphanumeric sequence, cross-referenced to the illustration figure number and item number. B-2