TM 9-2910-226-34 Figure 3-134. Installing spider assembly, spacer, and thrust plate. b. Installation. Install the timing device assembly as follows: (1) Refer to figure 3-135. Install bolt (F) in pump and timing device housing before assembly of timing device housing to pump housing. Install timing device housing (A), after checking to see if pump housing packing is in position, and secure with two flat washers (B), lockwashers (C), and machine screws (D). Torque tighten machine screws to 17-20 foot-pounds. Install housing packing (E). Figure 3-135. Installing timing device housing. (2) Refer to figure 3-136. Install pipe-to-tube elbow (C), pipe-to-tube tee (B), and oil distribution hose assembly (A). Figure 3-136. Installing oil distribution hose assembly and fittings. 3-80