TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 97 of 968
TM 9-2815-210-34-2-2 FRAME 54 1. 2. 3. 4. 5. NOTE Main bearing caps (1) and bearing by numbers one to seven counting crankcase (3). saddles (2) are called from front to rear of The number seven main bearing cap (1) has a slot on each side for rubber oil seals. Put number seven main bearing cap (1) on number seven bearing saddle (2). Mounting holes in number seven main bearing cap must line up with screw holes in number seven bearing saddle. Put number seven main bearing cap (1) on number seven bearing saddle (2). Coat two bolts (4) and washers (5) lightly with engine lubricating oil. Put in and hand tighten two bolts and washers. Using torque wrench, tighten two bolts (4) to 80 to 90 pound-feet. Using torque wrench, tighten two bolts (4) to 115 to 120 pound-feet. GO TO FRAME 55 4-78