Covering the politics, Business and technology of defense - Subscribe Today
TM-9-2815-210-34-2-2 Page 95

TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2

Page 95 of 968


Download
TM 9-2815-210-34-2-2 FRAME 52 1. 2. 3. 4. NOTE Main bearing caps (1) and bearing saddles (2) are called by numbers one to seven counting from front to rear of crankcase (3). Put number six main bearing cap (1) on number six bearing saddle (2). Mounting holes in number six main bearing cap must line up with screw holes in number six bearing saddle. Coat two bolts (4) and washers (5) lightly with engine lubricating oil. Put in and hand tighten two bolts and washers. Using torque wrench, tighten two bolts (4) to 80 to 90 pound-feet. Using torque wrench, tighten two bolts (4) to 115 to 120 pound-feet. GO TO FRAME 53 4-76