TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 91 of 968
TM 9-2815-210-34-2-2 FRAME 48 1. 2. 3. 4. Put main NOTE Main bearing caps (1) and bearing saddles (2) are called by numbers one to seven counting from front to rear of crankcase (3). Number four main bearing cap (1) is called main thrust bearing cap. It is wider than other main bearing caps. Number four bearing saddle (2) is also wider than other bearing saddles. thrust bearing cap (1) on number four bearing saddle (2). Mounting holes in main thrust bearing cap must line up with screw holes in number four earing saddle. Coat two bolts (4) and washers (5) lightly with engine lubricating oil. Put in and hand tighten two bolts. Using torque wrench, tighten two bolts (4) to 85 to 90 pound-feet. Using torque wrench, tighten two bolts (4) to 115 to 120 pound-feet. GO TO FRAME 49 4-72