TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 900 of 968
TM 9-2815-210-34-2-2 Table 6-6. Run-In Schedule - Short (Models LD-465-1 and LD-465-1C) NOTE During run-in, oil sump temperature shall not be more than 260°F. Oil pressure is measured at engine oil gallery. 1 Gross Brake Fuel Duration Engine Speed Horsepower (DF-1 of Period (minutes) (rpm) (bare engine) VV-F-800) 1 0 0 (minimum) Prelubricate at 25 psi (measured at engine oil gallery) 2 10 1200 15 Diesel 3 15 2000 64 Diesel 4 Retighten cylinder head nuts to 130 pound-feet for TD block and set valves immediate y following period 3. 5 15 2400 110 Diesel 6 10 2600 120 to 130 Diesel 7 Set high speed adjusting screw to limit maximum speed, no load 2850 to 2900 rpm. 8 Set full load 2600 126 to 131 Diesel power (62 lb/hr max. fuel flow ) 9 Power check full 1400 300 pound- Diesel load feet torque (rein) 10 Set low idle adjust- 650 to 700 0 Diesel ment 11 As needed to check Diesel for leaks 6-45