Covering the politics, Business and technology of defense - Subscribe Today
TM-9-2815-210-34-2-2 Page 898

TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2

Page 898 of 968


Download
TM 9-2815-210-34-2-2 Table 6-4. Run-In Schedule- Long (Model LDS-465-1A) NOTE During run-in, oil sump temperature shall not be more than 265°F. Oil pressure is measured at engine oil gallery. Gross Brake Fuel Duration Engine Speed Horsepower (DF-1 of Period (minutes) (rpm) (bare engine) VV-F-800) 1 0 0 (minimum) Prelubricate at 25 psi (measured at engine oil gallery) 2 30 1000 22 Diesel 3 15 1400 40 Diesel 4 Retighten cylinder head nuts to 130 pound-feet (157 pound-feet for TD block) and set valves immediately following period 3. 5 15 1600 60 Diesel 6 15 2200 120 Diesel 7 30 2600 140 Diesel 8 30 2600 170 to 180 Diesel 9 Set high speed adjusting screw to limit maximum speed, no load 2850 to 2900 rpm. 10 Set full load power 2600 175 to 185 Diesel (83 lb/hr max. fuel flow) 11 Set droop screw 1200 (37 to 39 lb/ Diesel or hr fuel flow) 1400 (44 to 45 lb/ Diesel hr fuel flow) 12 Power check full 2000 425 pound- Diesel load feet torque (min) (70 lb/hr max. fuel flow) 13 Set low idle adjust- 650 to 700 0 Diesel ment 14 As needed to check Diesel for leaks 6-43