TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 870 of 968
TM 9-2815-210-34-2-2 FRAME 6 Soldier A Soldiers A and B Soldier A Soldier B Soldier A 1. Using hoisting equipment, raise engine assembly (1) just enough to take weight off dynamometer test stand (2). 2. Slide engine assembly (1) to the rear until eight screw holes in flywheel adapter (3) are alined with screw holes in drive shaft (4). 3. Hold drive shaft (4) in place so screw holes stay alined. 4. Put in eight bolts (5) and lockwashers (6). Do not tighten bolts . 5. Lower engine assembly (1) all the way down and take off chain sling (7) . GO TO FRAME 7 TA 118633 6-15