Covering the politics, Business and technology of defense - Subscribe Today
TM-9-2815-210-34-2-2 Page 87

TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2

Page 87 of 968


Download
TM 9-2815-210-34-2-2 FRAME 44 1. 2. 3. 4. NOTE Main bearing caps (1) and bearing saddles (2) are called by numbers one to seven counting from front to rear of crankcase (3). Number two main bearing cap (1) has a flat mounting sur- face (4) for mounting oil pump. Put number two main bearing cap (1) on number two bearing saddle (2). Mounting holes in number two main bearing cap must line up with screw holes in number two bearing saddle. Coat two bolts (5) and washers (6) lightly with engine lubricating oil, Put in and hand tighten two bolts and washers. Using torque wrench, tighten two bolts (5) to 80 to 90 pound-feet. Using torque wrench, tighten two bolts (5) to 115 to 120 pound-feet. GO TO FRAME 45 4-68