TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 850 of 968
TM 9-2815-210-34-2-2 FRAME 2 1. 2. 3. 4. 5. NOTE Some engines do not use cotter pins (1). Put in two cotter pins (1). Push generator (2) toward engine. Put on two drive belts (3). Take off tags. Pull generator adjusting bracket (4) into place. Put in screw (5) with lockwasher (6) and step washer (7). Do not tighten screw. NOTE Refer to TM 9-2320-211-20 for correct tension of gener- ator drive belts (3). Pry generator (2) away from engine until tension of drive belts (3) is correct. Tighten screw (5). NOTE Some engines do not have ground strap (8). Put ground strap (8) in place. Put in screw with washer (9). END OF TASK TA 117772 5-221