TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 85 of 968
TM 9-2815-210-34-2-2 FRAME 42 1. 2. 3. 4. GO NOTE Main bearing caps (1) and bearing saddles (2) are called by numbers one to seven counting from front to rear of crankcase (3). The number one main bearing cap (1) has oil pump idler gear shaft (4). Put number one main bearing cap (1) on number one bearing saddle (2) with oil pump idler gear shaft (4) facing out as shown. Coat two bolts (5) and washers (6) lightly with engine lubricating oil. Put in and hand tighten two bolts and washers. Using torque wrench, tighten two bolts (5) to 80 to 90 pound-feet. Using torque wrench, tighten two bolts (5) to 115 to 120 pound-feet. TO FRAME 43 4-66