TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 848 of 968
TM 9-2815-210-34-2-2 1. Push generator (1) toward engine (2). Put two drive belts (3) in place on pulley (4). Take off tags. 2. Swing adjustment bracket (5) in place and put in screw with lockwasher and step ‘washer (6). Do not tighten screw. NOTE Refer to TM 9-2320-211-20 for correct drive belt tension. 3. Pry generator (1) away from engine (2) until drive belts (3) are at correct tension. Tighten screw (6). END OF TASK 5-219