TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 836 of 968
TM 9-2815-210-34-2-2 FRAME 2 NOTE Plugs or tape put on turbocharger during removal must be taken off during replacement. Soldier A 1. Slide air inlet hose (1) in place and tighten hose clamps (2). 2. Put turbocharger gasket (3) in place. Put turbocharger (4) in place and hold until soldier B puts in mounting screws and nuts. Soldier B 3. Put in two screws (5). Put on four nuts with lockwashers (6). 4. Put oil inlet adapter with gasket (7) in place. Put in two screws with lockwashers (8). 5. Put oil inlet line (9) in place. Tighten two fitting nuts (10). GO TO FRAME 3 5-207