TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 823 of 968
TM 9-2815-210-34-2-2 5-36. TURBOCHARGER ASSEMBLY. a. Engine LDT-465-1C. FRAME 1 1. 2. 3. 4. Put fuel Put fuel CAUTION Do not use open end wrench to put flame heater fuel inlet adapter (1) or flame heater fuel return adapter (2) into nozzle and check valve assembly (3). Adap- ters may be damaged. Use only tubing wrench or box wrench. inlet adapter (1) into nozzle and check valve assembly (3). return adapter (2) into nozzle and check valve assembly (3). NOTE Make sure that locknut (4) is put onto nozzle and check valve assembly (3) before nozzle and check valve assem- bly is put into intake manifold elbow (5). Hand tighten nozzle and check valve assembly (3) into intake manifold elbow (5). Tighten locknut (4) against intake manifold elbow. Adapters (1 and 2) should face as shown. Put spark plug gasket (6) over end of spark plug (7) as shown. Put in spark plug. NOTE Make sure that hose (8) is on end of intake elbow (5) and that both hose clamps (9) are on hose. GO TO FRAME 2 5-194