TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 815 of 968
TM 9-2815-210-34-2-2 FRAME 15 1. 2. 3. 4. 5. 6. Turn crankshaft about 45° to the left as viewed from front of engine. Then turn crankshaft back to the right until proper timing mark on crankshaft vibration damper and pulley lines up with timing pointer on timing gear cover. Refer to frame 1. Check fuel injection pump timing again. Refer to frames 13 and 14. Put automatic timing device cover gasket (1) on automatic timing device win- dow (2) as shown. Put automatic timing device cover (3) on automatic timing device window as shown. Screw in and tighten four screws and lockwashers (4). Put timing window gasket (5) on side of fuel pump (6) as shown. If working on any engine except LDS-465-2, put timing window cover (7) on side of fuel pump (6) as shown. Put in two fillister head screws and lock- washers (8). If working on engine LDS-465-2, put fuel shutoff solenoid (9) on side of fuel pump (6). Put in two sockethead - screws and lockwashers (10). END OF TASK 5-186