TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 79 of 968
TM 9-2815-210-34-2-2 FRAME 39 NOTE Main thrust bearing halves (1) are different from other main bearing halves (2). Main thrust bearing halves have a flange (3) on each side. Wear limits are same for both kinds of main bearing half. Readings must be within limits given in table 4-14. If readings are not within given limits, throw away all 14 main bearing halves (1 and 2) and get a new standard size main bearing kit. 1. Measure thickness of all 14 main bearing halves (1 and 2). 2. If main bearing halves (1 and 2) were changed, do step 1 again for new main bearing halves. GO TO FRAME 42 4-60