TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 769 of 968
TM 9-2815-210-34-2-2 FRAME 2 1. 2. 3. 4. 5. END On some to water engines, NOTE engines, oil cooler water inlet tube (1) is joined pump (2) with mounting flange (3). On other - - oil cooler water inlet tube is joined to water pump with hose (4) and clamp (5). If working on engine with mounting flange (3), do steps .1, 2, and 3. If working on engine without mounting flange (3), do steps 4 and 5. For engines with mounting flange (3), put water inlet tube (1) in place. Slide hose (6) onto oil cooler water inlet (7). Put gasket (8) in place on water pump (2). Aline flange (3) and put in four screws with nuts and lockwashers (9). Tighten two hose clamps (5). For engines without mounting flange (3), put Slide hose (6) onto oil cooler water inlet (7). Slide hose (4) onto water pump (2). Tighten OF TASK water inlet tube (1) in place. four hose clamps (5). 5-140