TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 761 of 968
TM 9-2815-210-34-2-2 FRAME 5 1. 2. 3. 4. 5. NOTE Plugs and tags put on during removal must be taken off during replacement. If working on type A or B, flame heater assembly, put ignition unit (1) with two Put Put Put Put clamps (2) in place. on two nuts with lockwashers (3). flame heater cable assembly (4) in place. Tighten nuts (5 and 6). NOTE Type C flame heater assembly may not have tube clamp (7). wiring harness (8) with tube clamp (7) in place. Tighten nut (9). tube clamp (7) in place and put on nut with lockwasher (10). GO TO FRAME 6 5-132