TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 760 of 968
TM 9-2815-210-34-2-2 FRAME 4 1. 2. 3. 4. 5. 6. Put flame heater gasket (1) in place. Put flame heater elbow (2) in place. NOTE On some engines, ignition coil (3) may be mounted on top of engine instead of next to flame heater elbow as shown. Put ignition coil (3) with two clamps (4) in place. Put on four nuts with lockwashers (5). Screw in spark plug (6) with gasket (7). Tighten spark plug to 8 pound- inches. Screw in nozzle and check valve assembly (8) with locknut (9). Tighten locknut. CAUTION Do not use open end wrench to put on tube adapters (10). Use tubing wrench or box wrench or equipment may be damaged. Put on two tube adapters (10). GO TO FRAME 5 5-131