TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 743 of 968
TM 9-2815-210-34-2-2 FRAME 2 1. 2. 3. 4. 5. Put Put Put Put NOTE Two types of top mounted-covered flame heater fuel pump and ignition units have been used on these en- gines. Type A and type B assemblies have the same parts and are put back in the same way. 90° elbow (1) and 45° elbow (2) into flame heater fuel pump (3). fuel pump (3) in place. Put on two spring clamps (4), wiring harness (5) in place. Screw on flame heater fuel pump-to-flame heater in and tighten fitting ‘nut’(8). Put flame heater fuel pump-to-flame heater Screw in and tighten fitting nut (10). GO TO FRAME 3 and tighten nut (6). nozzle tube (7) fuel filter tube in place. Screw (9) in place. 5-114