TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 721 of 968
TM 9-2815-210-34-2-2 FRAME 5 1. 2. 3. 4. 5. NOTE Cylinders are called number one through six counting from front to rear of engine. Each cylinder has one in- take valve and one exhaust valve. Intake valve for each cylinder is toward front of cylinder and exhaust valve is toward rear of cylinder. Slide 0.025-inch feeler gage between cylinder number one exhaust rocker arm pad (1) and exhaust valve stem (2). Turn adjusting screw (3) until feeler gage fits snugly between cylinder number one exhaust rocker arm pad (1) and exhaust valve stem (2). Keep adjusting screw (3) from turning and tighten locknut (4). Check that 0.025-inch feeler gage blade still fits snugly between exhaust rocker arm pad (1) and exhaust valve stem (2). If feeler gage does not fit snugly, loosen locknut (4) and do steps 1 through 4 again. Do steps 1 through 4 again for cylinder number two and cylinder number four exhaust valves. GO TO FRAME 6 5-92