TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 718 of 968
TM 9-2815-210-34-2-2 FRAME 2 NOTE If you are using push rods (1) that were taken out, make sure they go in push rod passage (2) they were taken from. 1. Lower one push rod (1) through each of 12 push rod passages (2) in cylinder heads (3). Bottom end of push rod must fit through tappet bore (4) and rest on tappet (5) inside crankcase (6) as shown. GO TO FRAME 3 5-89