TM-9-2815-210-34-2-2 LDS-465-1/LDS-465-2 Multifuel Engine Maintenance Manual Part 2
Page 714 of 968
TM 9-2815-210-34-2-2 WARNING Soldiers A and B Soldier A Soldier B 1. 2. 3. 4. 5. 6. END OF TASK Pressure plate assembly (1) is heavy. It must be held firmly up and against flywheel (2) until mounting screws (4) are put in. If it is not held up, it will fall and cause injury to personnel and damage to equipment. Put pressure plate assembly (1) in place against flywheel (2) Aline eight holes in pressure plate assembly with holes in clutch disk (3). Hold pressure plate assembly (1) firmly up and against clutch disk (3) until eight mounting screws (4) are put in. Put in eight screws with lockwashers (4). Tighten eight screws (4) to 23 to 27 pound-feet. Press four release levers (5), one at a time, using prybar, and take out release lever spacer blocks (6). Take out clutch alining tool (7). 5-85